Archive for December, 2012


Smart
Service Light Reset – For Two
• Turn On ignition.
• Adjust instrument display to show ‘Maintenance’.
• Turn Off the ignition within 10 seconds (‘Maintenance’ should remain in display).
• Press and hold the service button which is located on the top left of the instrument
‘Pod’ while switching the ignition on.
• Hold the service button for a further 10 seconds to reset the Oil interval.
• Check instrument display for remaining distance until service.

Advertisements

Ford
Electronic Parking Brake (EPB) Manual release/Service mode – S-Max/
Galaxy
The following procedures should be followed before service work is carried out on the
electronic parking brake system fitted to the Ford S-max/Galaxy models 2006-2008.
The following pre-requisites should be met before commencing:
• Vehicle on level ground
• Ensure vehicle battery is fully charged
Service mode activation (EPB off)
• Release the parking brake
• Switch ignition On (position 2)
• Press and hold down throttle pedal
• Press and hold down the parking brake switch
• Switch ignition Off (position 0)
• Switch ignition On (position 2) within 5 seconds
• When the parking brake has fully actuated (off) switch ignition OFF (position 0)
• Release throttle pedal
• Release parking brake switch
Service mode de-activation (EPB on)
• Switch ignition On (position 2)
• Press and hold down throttle pedal
• Lift and hold the parking brake switch
• Switch ignition Off (position 0)
• Switch ignition On (position 2) within 5 seconds
• When the parking brake has fully actuated (on), switch ignition off (position 0)
• Release throttle pedal
• Release parking brake switch